T O P I C R E V I E W |
djcaz_aom |
Posted - 06/04/2007 : 11:30:56 I cannot get this thing to program an empty chip!!!
I've read and tried out what I could find here on the forums.
I always get the following error code:
ERROR at 0x000000 Chip = 0x00 buffer = 0xE2
Any clue anyone? |
3 L A T E S T R E P L I E S (Newest First) |
ZLM |
Posted - 08/04/2007 : 13:14:58 see: http://www.mcumall.com/forum/topic.asp?TOPIC_ID=328 |
Sproket |
Posted - 08/04/2007 : 10:03:04 here are the jumper setting for Dual programmer to erase 27SF512. You have to put a jumper vertical to erase only. Take off when programming. Look at pic, jumper goes were the red is drawn.
http://www.crldomain.com/willem/erasing27SF512.bmp
|
ZLM |
Posted - 06/05/2007 : 07:04:56 The chip seems not been erased yet. You need to erase the chip first. |