T O P I C R E V I E W |
dmitry |
Posted - 10/29/2005 : 05:21:38 Dual power, AT27C256, verified all jumper settings, yet every time I program, it gets to about 37%, and then gives this error.
Help! |
2 L A T E S T R E P L I E S (Newest First) |
ZLM |
Posted - 01/16/2006 : 15:16:07 If you try different chip but failed in same address, then I'll say the addrress line may have contact issue. Check the 3 address chips on the programmer, if any loose condition. You can swap them see if the failed address changes. |
LC |
Posted - 01/11/2006 : 23:31:04 Are you trying different chips? If you are, I recommend connecting the 9V external adapter. Mine would not work without it. Blank checks always failed without the external power. |
|
|