MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Problems using the MCUMall 16bit adapter - Solved

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List Spell Checker
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

   Insert an Image File
 Check here to include your profile signature.
    

T O P I C    R E V I E W
jensmaa Posted - 01/09/2013 : 04:33:42
Hey folks!

Since I failed miserably with this adaptor... http://www.mcumall.com/forum/topic.asp?TOPIC_ID=4997

...I bought a MCUMall 16bit adaptor. Unfortunatly I still can't manage to burn the eprom :(

I attached some pictures:

The adaptor:

http://www.jensma.de/upload/files/hW01Y6pL__DSC_0585.jpg

The adress wires connected to the programmer:

http://www.jensma.de/upload/files/I654mYVb__DSC_0587.jpg

The adress wires connected to the adaptor:

http://www.jensma.de/upload/files/ZnsgUAQv__DSC_0588.jpg

I've got a wall wart connected with ~12V:

http://www.jensma.de/upload/files/Y5Mhsw5u__DSC_0592.jpg

The programmer:

http://www.jensma.de/upload/files/onTsdbkE__DSC_0589.jpg

Any help is much appreciated :)

With the jumper next to the dipf and p1 connected, everything worked after re-erasing the eprom :)
4   L A T E S T    R E P L I E S    (Newest First)
jensmaa Posted - 01/31/2013 : 11:51:21
quote:
Originally posted by ZLM

Try to change V3/V4 on adapter.


Worked like a charm, thank you :)
ZLM Posted - 01/18/2013 : 21:29:42
Try to change V3/V4 on adapter.
jensmaa Posted - 01/09/2013 : 04:44:06
Well, with the jumper set, the first bytes (aborting at 0x00E8BF right now) are written successfully then the process is aborted. Any ideas :(?

I connected P1 too, it's still failing.
jensmaa Posted - 01/09/2013 : 04:38:49
Ah, I forgot to jumper J3, right beside the dip switches. Testing now with jumper set. If you notice any other mistakes, don't hesitet to answer :)

MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000