T O P I C R E V I E W |
jueidi |
Posted - 08/06/2015 : 05:52:32 S 29394 is an eeprom produced by Seiko. I have a GQ4x which does not support this chip. Is there any way to use my programmer to read it and write it Any advice |
3 L A T E S T R E P L I E S (Newest First) |
ZLM |
Posted - 08/15/2015 : 07:21:37 That will be covered by different Classes. |
jueidi |
Posted - 08/10/2015 : 01:57:42 Thanks a lot. I'll try it soon. But this seems to be very simple. Did you take in consideration the different : pins arrangement;frequency and read/write volt. |
ZLM |
Posted - 08/09/2015 : 22:46:15 Add following lines into devices.txt
Name="S-29194",ID="XXXX",Class="93C46B_16Bit",BufferMode="16BIT",Category="SERIAL_EPROM",MFG="Seiko"; Name="S-29294",ID="XXXX",Class="93C56B_16Bit",BufferMode="16BIT",Category="SERIAL_EPROM",MFG="Seiko"; Name="S-29394",ID="XXXX",Class="93C66B_16Bit",BufferMode="16BIT",Category="SERIAL_EPROM",MFG="Seiko"; |
|
|