Author |
Topic ![Next Topic Next Topic](icon_go_right.gif) |
|
keropak
![](icon_star_gold.gif)
Indonesia
3 Posts |
Posted - 02/14/2017 : 08:03:40
|
please help me again... I add W25Q16CVSIG but didnt work Name="W25Q16CV",ID="EF6017",Class="W25X10",Category="SERIAL_EPROM",MFG="Winbond",Vcc="3.6V",CodeSize="2097152",Adapter="ADP-099+ADP-081, ADP-081A",Message="Put ADP-099 voltage jumpper on 1V8 position."; |
|
Reply #1
ZLM
![](icon_star_green.gif) ![](icon_star_green.gif) ![](icon_star_green.gif) ![](icon_star_green.gif) ![](icon_star_green.gif)
2941 Posts |
Posted - 02/19/2017 : 00:21:54
|
Name="W25Q16CV",ID="EF6017",Class="W25X10",Category="SERIAL_EPROM",MFG="Winbond",Vcc="5V",CodeSize="2097152",Adapter="ADP-081+ADP-099 adapter",Message="Put ADP-099 voltage jumper on 1V8 position. Make sure the ADP-099 is used. The programmer will supply 5V voltage. Without ADP-099, the chip maybe damaged.";
|
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
|
Topic ![Next Topic Next Topic](icon_go_right.gif) |
|
|
|