MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-4X programmer?
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

alisevim

1 Posts

Posted - 07/14/2012 :  05:16:54  Show Profile  Reply with Quote
We bought GQ-4X programmer,while we are using the devise we are having problem with to copying information which is in eprom or chip to computer.Also evry eprom cant be detected by device.is this stemming from the devise itself?

in some chips we receive warnings in Verify and Erase steps,are we doing mistake or is that from the devise?fter choosing the devise some sections are not signed on the right side on auto mode..(erase,read,lock). errors about erasing is becaouse of unsigd section?
Also we need a using manual about general usage of the device.
Reply #1

ZLM

2937 Posts

Posted - 07/22/2012 :  10:30:56  Show Profile  Reply with Quote
Device Id feature is to identify the chip type is selected correctly from the software.

If you receive a warring, then check the device type you selected, make sure it is correct.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.07 sec. Snitz Forums 2000