MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-4X does not respond under re 6.23 software		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

rsj

1 Posts
Posted - 08/28/2013 :  11:02:26  Show Profile  Reply with Quote
Have a GQ-4X running under re 6.14c. Finally got around to downloading re 6.23. When I install and run re 6.23 I get "Did not get response from programmer, Demo only". Reloaded re 6.14c, works ok. Tried another download and install same problem. Have Hardware rev 1.40, USB driver rev1.0. Any suggestions? Thx..Ray
Edited by - rsj on 08/28/2013 11:03:35
Reply #1

ZLM

2937 Posts
Posted - 08/31/2013 :  21:24:42  Show Profile  Reply with Quote
Upgrade the USB driver to Re2.01.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000