MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 buffer wont verify
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

vollosso

USA
1 Posts

Posted - 04/22/2015 :  14:36:07  Show Profile  Reply with Quote
Im pulling data from a TMS28F200AZ with the following hardware:

GQ-3x, ADP-019 v2.1 psop adapter, windows 8.1.
Im using 5v header and the right side of the 29f/28f header.

Every time i pull the data and try and verify it i get an error and every time the location is different.


Verifying... Code
Verify Failed, Address=0x000E04, Device=0x0A, Buffer=0x7C
Verify Failed 
Elapsed time: 2.52 seconds.
ID check OK
Reading... Code
Elapsed time: 1.63 seconds.
Read completed. 
ID check OK
Verifying... Code
Verify Failed, Address=0x001416, Device=0x80, Buffer=0xF8
Verify Failed 
Elapsed time: 2.70 seconds


I cant figure out why it keeps doing this?
Reply #1

ZLM

2937 Posts

Posted - 04/25/2015 :  21:39:19  Show Profile  Reply with Quote
It looks to me is pin contacting issue. Check and confirm all pin contacting.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000