MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-4X DS2431 help
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

webgas

3 Posts

Posted - 07/30/2015 :  03:34:45  Show Profile  Reply with Quote
With the recent update is available the use of this EEPROM DS2431,
I tried to read different in my possession is the hexadecimal result is: 1F or 2F or 3F etc ... i believe correct.
Question how do I write it? after several attempts I always get verify failed and the EEPROM is not just written !!!
Reply #1

ZLM

2937 Posts

Posted - 08/02/2015 :  17:31:01  Show Profile  Reply with Quote
The DS2431 is one wire protocol EEPROM. It is not in the supported list yet. It will be added later.
Go to Top of Page
Reply #2

webgas

3 Posts

Posted - 08/07/2015 :  04:40:47  Show Profile  Reply with Quote
DS2431 is supported on the device "GQ-4X" from software version 6:36:
http://www.mcumall.com/comersus/store/mcumall_TrueUSBWillemsupportICs.asp

perhaps it is still in testing?
I consider all my reading not correct?
to let me know when you can work well with one wire protocol EEPROM, or I'll have to buy another programmer for these EEPROM.
Go to Top of Page
Reply #3

ZLM

2937 Posts

Posted - 08/07/2015 :  07:15:30  Show Profile  Reply with Quote
Checked this DS2431.

It is not fully supported yet, it is under testing. The read/write are not fully tested. It still need sometimes to finish the testing.
Go to Top of Page
Reply #4

webgas

3 Posts

Posted - 11/18/2015 :  11:57:59  Show Profile  Reply with Quote
I confirm the failure with the software 6.38
the reading is incorrect, any data(FF or 00) is contained in the chip, I find myself always 1F read.
openprogrammer works with these chips :(
Go to Top of Page
Reply #5

psgama

Canada
6 Posts

Posted - 06/23/2016 :  16:08:18  Show Profile  Reply with Quote
Any progress with the DS2431? It is not showing up on the supported device list, although it shows in the text based device file in the program folder.
Go to Top of Page
Reply #6

psgama

Canada
6 Posts

Posted - 03/13/2018 :  09:38:39  Show Profile  Reply with Quote
Has this chip been supported yet?
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.13 sec. Snitz Forums 2000