MCUmall EPROM BIOS Chip Burner Forum
Home
|
Profile
|
Register
|
Active Topics
|
Members
|
Search
|
FAQ
Username:
Password:
Save Password
Forgot your Password?
All Forums
MCUmall Forums
Open Source Project Willem Programmer Hardware
Jumper Settings On PCB3B
New Topic
Reply to Topic
Printer Friendly
Author
Topic
usb
138 Posts
Posted - 06/30/2005 : 16:17:13
Reply #1
Chezedik
USA
6 Posts
Posted - 03/08/2007 : 19:42:35
Is black where the jumper is?
Reply #2
ZLM
2936 Posts
Posted - 03/09/2007 : 08:24:48
yes.
Note: For those PCB3.5/4.5/5.0C board. VPP jumper JP7 is referring to JP5 in this picture.
Reply #3
phone789
Cayman Islands
2 Posts
Posted - 05/21/2015 : 01:33:15
Note: For those PCB3.5/4.5/5.0C board. VPP jumper JP7 is referring to JP5 in this picture.
dfgs
Topic
New Topic
Reply to Topic
Printer Friendly
Jump To:
Select Forum
MCUmall Forums
General Discuss
Novice Place
True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
GQ-5X
Automobile engine ECU, Immo, Air bag chip tunning
Using The Enhanced/Dual power Willem Programmer
Open Source Project Willem Programmer Hardware
Wellon/WEILEI USB Programmer
TOP USB Programmer
EasyPRO/SmartPRO USB Programmer
PIC Programmer
Using the AVR JTAG ICE and AVRISP ISP programmer
--------------------
Home
Active Topics
Frequently Asked Questions
Member Information
Search Page
MCUmall EPROM BIOS Chip Burner Forum
© Copyright 2003 - 2009 Mcumall Electronics Inc.
Generated in 0.06 sec.
Snitz Forums 2000