MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Vista Support ?		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

cgrant

USA
3 Posts
Posted - 02/10/2008 :  05:19:27  Show Profile  Reply with Quote
I am having problems getting the willem gq 2x to run on vista. It does not show up in the device manager nor does the software recognise the device when plugged into a usb 2.0 input.

any advice would be greatly appriciated
other detail:
Vista Ultimate
mplab also installed.
current chip 16 series pic.
Reply #1

cgrant

USA
3 Posts
Posted - 02/10/2008 :  05:35:14  Show Profile  Reply with Quote
PS. I have tried the auto hardware scan. usb recognises the device but the auto load (get driver automatically by scanning the web does not work.)

quote:
Originally posted by cgrant

I am having problems getting the willem gq 2x to run on vista. It does not show up in the device manager nor does the software recognise the device when plugged into a usb 2.0 input.

any advice would be greatly appriciated
other detail:
Vista Ultimate
mplab also installed.
current chip 16 series pic.
Go to Top of Page
Reply #2

ZLM

2937 Posts
Posted - 02/10/2008 :  12:34:21  Show Profile  Reply with Quote
The True USB Willem should work with Windows Vista Ultimate 32 bit. But not the 64 bit system.

Please check your vista is 32 bit vista.
Go to Top of Page
Reply #3

cgrant

USA
3 Posts
Posted - 02/11/2008 :  18:11:25  Show Profile  Reply with Quote
Thanks I am running the 64 bit.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.11 sec. Snitz Forums 2000