MCUmall EPROM BIOS Chip Burner Forum
Home
|
Profile
|
Register
|
Active Topics
|
Members
|
Search
|
FAQ
Username:
Password:
Save Password
Forgot your Password?
All Forums
MCUmall Forums
Open Source Project Willem Programmer Hardware
new programmer problems
New Topic
Reply to Topic
Printer Friendly
Author
Topic
busta9876
USA
6 Posts
Posted - 06/10/2006 : 19:42:33
I got the dual power universal programmer (the $42.99 one)
When I plug in USB or 12v AC power and the LTP cable, all 3 led's light, voltage regulator gets hot quick.
Any clues where to start?
thanks
Brendan.
Reply #1
ZLM
2937 Posts
Posted - 06/11/2006 : 11:02:49
Try to remove the AC power. Only use USB power.
Most of chips will work when using USB power only.
Topic
New Topic
Reply to Topic
Printer Friendly
Jump To:
Select Forum
MCUmall Forums
General Discuss
Novice Place
True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
GQ-5X
Automobile engine ECU, Immo, Air bag chip tunning
Using The Enhanced/Dual power Willem Programmer
Open Source Project Willem Programmer Hardware
Wellon/WEILEI USB Programmer
TOP USB Programmer
EasyPRO/SmartPRO USB Programmer
PIC Programmer
Using the AVR JTAG ICE and AVRISP ISP programmer
--------------------
Home
Active Topics
Frequently Asked Questions
Member Information
Search Page
MCUmall EPROM BIOS Chip Burner Forum
© Copyright 2003 - 2009 Mcumall Electronics Inc.
Generated in 0.12 sec.
Snitz Forums 2000