| T O P I C R E V I E W |
| tahir |
Posted - 06/08/2012 : 06:33:07
i have got 16bit adapter it erase fine and blank check fine but when writing i get this error tried all speed settings still fail tried 5v and 3v setting still no fail when it says set to 3.6v does that mean 3volt because there is no 3.6volt jumper setting <TE28F160C3B>>
Set the adapter to 3.6V jumper position.
Load C:\Users\SAMASHERMOMI\Desktop\t\250.BIN
c:\users\samashermomi\desktop\t\250.bin.
This software is updated already.
ID check OK
Writing... Code
Elapsed time: 2.10 seconds.
Write failed, Address=0x000000, Buffer=0x0B Device=0xFF
Write failed |
| 5 L A T E S T R E P L I E S (Newest First) |
| tahir |
Posted - 06/13/2012 : 09:16:02
Zlm tried your jumper setting worked a treat got it working also the freezing problem is sorted it was incorrect jumper setting
Done as said no problem thankyou thankyou |
| tahir |
Posted - 06/13/2012 : 03:43:28
thanks zlm will try it i have new problem im running windows7 32bit the softwre locks up shall try to delete and reinstall the software thanks sometimes it works i think my pc could be corrupted thanks |
| ZLM |
Posted - 06/12/2012 : 21:29:49
see drawing on adapter.
Image Insert:
12.17 KB |
| tahir |
Posted - 06/12/2012 : 12:01:29
Hi could give proper jumper settings plz thanks |
| ZLM |
Posted - 06/12/2012 : 08:51:35
check your adapter jumper settings.
|
