| T O P I C R E V I E W |
| vampirodauva |
Posted - 11/24/2016 : 16:07:07
hi
I already received the GQ.4x4 programmer, first installed the software, then turned on the programmer and then installed the usb drivers. But this error always appears (Initialization failed. Please reconnect) see attached photos. My operating system and W7 32bit.
please help me
regards |
| 8 L A T E S T R E P L I E S (Newest First) |
| anniel |
Posted - 09/15/2017 : 03:59:40
quote:
Originally posted by supervizeur
quote:
Originally posted by anniel
What was the problem?
Also curious.
We'll never know. |
| supervizeur |
Posted - 08/03/2017 : 05:32:21
quote:
Originally posted by anniel
What was the problem?
Also curious. |
| anniel |
Posted - 07/16/2017 : 04:42:03
What was the problem? |
| ZLM |
Posted - 12/03/2016 : 21:35:54
Please contact support@mcumall.com |
| vampirodauva |
Posted - 11/27/2016 : 02:25:23
hi ZLM
The sound of my hardware and the same as you sent me "hardware problem sound". The programmer is new, never worked, I can not understand.
many thanks
regards |
| ZLM |
Posted - 11/26/2016 : 17:08:11
It seems the programmer has problem.
Check the power-up sound.
Hardware good sound:
http://www.mcumall.com/support/Good.mp3
Hardware problem sound:
http://www.mcumall.com/support/Error.mp3 |
| vampirodauva |
Posted - 11/26/2016 : 12:27:34
hi
please see the pictures
regards
Download Attachment: 
74011
Download Attachment:
6194
Download Attachment:
59870 |
| anniel |
Posted - 11/25/2016 : 03:46:39
http://www.mcumall.com/forum/topic.asp?TOPIC_ID=7054 |
