T O P I C R E V I E W |
Corvette_Lee |
Posted - 04/23/2008 : 23:22:37 I have problem with adapter or programmer
EasyPro L+ Adapter TSOP56 Xeltek SA628 Intel Flash E28F640J3A120
Show this error: (I re-check with 3 different flash and cleaning contact)
Image Insert:
100.3 KB
Regards Mr. Lee |
12 L A T E S T R E P L I E S (Newest First) |
MaarioS |
Posted - 08/24/2015 : 05:38:41 Hello, I just borrowed the photo from above. Does anyone have the same Xeltek TSOP56 adapter?? Can anyone tell me what the space is between those pins?? I marked it as C. Give me dimensions in either mm or inches, doesn't matter. Many thanks in advance!!
Image Insert:
127.54 KB |
Corvette_Lee |
Posted - 05/21/2008 : 14:20:51 Arrived correct adapter, work fine.
I will send wrong adapter for RMA.
Best Regards Mr. Lee |
Corvette_Lee |
Posted - 04/28/2008 : 13:32:52 This down plate circuit is same?
Image Insert:
24.35 KB
Red not connect. In same color interconnect
Thanks Mr. Lee |
ZLM |
Posted - 04/27/2008 : 22:28:17
[b]Image Insert:[/b][br][br][size=1] 103.73 KB[/size=1] |
Corvette_Lee |
Posted - 04/27/2008 : 13:42:08 schematic wrong adapter TSOP56
Image Insert:
51.64 KB
Please, send me correct schematic. |
Corvette_Lee |
Posted - 04/26/2008 : 08:56:19 Top part ZIF board, not have 8 pin.
Image Insert:
96.97 KB
Can you publish picture of You adapter ?
Regards Mr. Lee |
Corvette_Lee |
Posted - 04/25/2008 : 19:44:27 comparing with the image you sent me, have difference in adapters.
with my adapter said "Poor Contact at Pin 22,23,26,27,44,45,46,47" = 8 pin, same amount as this missing pin in my adapter.
Image Insert:
80.9 KB |
Corvette_Lee |
Posted - 04/25/2008 : 13:30:09 I test with 4 flash E28F640J3A120 + adapter TSOP56 Xeltek SA628 + EasyPRO L+
and 1 flash TE28F320J3C110 + adapter TSOP56 Xeltek SA628 + EasyPRO L+
same result: “poor contact at pin 22,23,26,27,44,45,46,47”
Image Insert:
12.27 KB
Regards Mr. Lee |
ZLM |
Posted - 04/25/2008 : 08:40:03 The auto select may not work on this TSOP56 chip. |
Corvette_Lee |
Posted - 04/24/2008 : 18:29:10 I spoke with a friend.. with same adapter + flash E28F640J3 + Xeltek SuperPro 580U = work fine.
I think problem of software or firmware of EasyPRO L+
Image Insert:
34.17 KB
Regards Mr. Lee |
Corvette_Lee |
Posted - 04/24/2008 : 14:59:14 quote: Originally posted by ZLM
Please check the chip orientation in the ZIF socket? Also, check the contacting between adapter and programmer ZIF. Try any other chips on the programmer, so that to confirm the programmer is working fine.
Dear ZLM,
- check the chip orientation in the ZIF socket, I check, OK - check the contacting between adapter and programmer ZIF, I check, OK
I can read with EasyPRO L+: 29F040 with adapter PLCC32 for DIP32, OK FM27C010 direct read, OK SST29EE010 direct read, OK
I think, the adapter TSOP56 Xeltek SA628 not is compatible with EasyPRO L+. I test with different 3 chip E28F640J3A120 and same problem.
Image Insert:
194.79 KB
Regards Mr. Lee |
ZLM |
Posted - 04/24/2008 : 08:15:20 Please check the chip orientation in the ZIF socket? Also, check the contacting between adapter and programmer ZIF. Try any other chips on the programmer, so that to confirm the programmer is working fine.
|