MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Dual Power Programmer Issues
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

KD

USA
1 Posts

Posted - 11/03/2006 :  21:59:47  Show Profile  Reply with Quote
Hi, New to the world of IC programming Not so new to the world of programming in general. Simple question, When I connect my usb cable and my printer data cable to the programmer, and I try to test the hardware with the "Test Hardware" under the help menu in the programmer software version 0.97g with no IC present in the programmer, is it normal to get the error message "Check power & Connection" ? Does the programmer need to have an IC present for the software to recognise the programmer? Feel free to reply to me via email kd-boss@yahoo.com.tw

Edited by - KD on 11/03/2006 22:01:39
Reply #1

ZLM

2937 Posts

Posted - 11/05/2006 :  17:23:18  Show Profile  Reply with Quote
See:
http://www.mcumall.com/forum/topic.asp?TOPIC_ID=22
http://www.mcumall.com/forum/topic.asp?TOPIC_ID=299
http://www.mcumall.com/forum/topic.asp?TOPIC_ID=242
and
http://www.mcumall.com/forum/topic.asp?TOPIC_ID=10

Edited by - ZLM on 11/05/2006 17:23:56
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.1 sec. Snitz Forums 2000