MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-4X4 not able to update firmware		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

anniel

2540 Posts
Posted - 04/28/2016 :  10:39:19  Show Profile  Reply with Quote
Hi ZLM, my GQ-4X4 is not able to update firmware after selecting the "AT59C11(16Bit)" in the device list. Other devices are ok on the GQ-4X4 and the AT59C11 is ok on the original GQ-4X. The software stays locked-up at 100%.



Image Insert:

101834 bytes
Edited by - anniel on 04/28/2016 10:42:37
Reply #1

ZLM

2937 Posts
Posted - 05/02/2016 :  20:40:22  Show Profile  Reply with Quote
Try:

http://www.mcumall.com/download/TrueUSBWillem/USBPrgSetup7.09.exe
Go to Top of Page
Reply #2

anniel

2540 Posts
Posted - 05/03/2016 :  02:32:47  Show Profile  Reply with Quote
Thank you ZLM. I will when time permits and report back.
Go to Top of Page
Reply #3

anniel

2540 Posts
Posted - 05/03/2016 :  05:27:27  Show Profile  Reply with Quote
Yes ZLM, it goes trough the firmware update fine now. I have no 59C11 handy for tests right now but I will have to reprogram some in the near future...
I'll keep you posted.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000